| Laser cladding E Toyserkani, A Khajepour, SF Corbin CRC press, 2004 | 1111 | 2004 |
| 3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process E Toyserkani, A Khajepour, S Corbin Optics and lasers in engineering 41 (6), 849-867, 2004 | 340 | 2004 |
| Cladding of WC-12Co on low carbon steel using a pulsed Nd:YAG laser CP Paul, H Alemonhammad, E Toyserkani, A Khajepour, SF Corbin Materials Science and Engineering 464 (1-2), 170-176, 2007 | 263 | 2007 |
| Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe–TiC composite coatings A Emamian, SF Corbin, A Khajepour Surface and Coatings Technology 205 (7), 2007-2015, 2010 | 207 | 2010 |
| The influence of particle distribution on the mechanical response of a particulate metal matrix composite SF Corbin, DS Wilkinson Acta metallurgica et materialia 42 (4), 1311-1318, 1994 | 197 | 1994 |
| Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys V Fallah, M Amoorezaei, N Provatas, SF Corbin, A Khajepour Acta Materialia 60 (4), 1633-1646, 2012 | 195 | 2012 |
| Engineered porosity via tape casting, lamination and the percolation of pyrolyzable particulates SF Corbin, PS Apté Journal of the American Ceramic Society 82 (7), 1693-1701, 1999 | 187 | 1999 |
| Three-dimensional finite element modeling of laser cladding by powder injection: Effects of powder feedrate and travel speed on the process E Toyserkani, A Khajepour, S Corbin Journal of Laser Applications 15 (3), 153-160, 2003 | 159 | 2003 |
| Influence of porous composite microstructure on the processing and properties of solid oxide fuel cell anodes RMC Clemmer, SF Corbin Solid State Ionics 166 (3-4), 251-259, 2004 | 141 | 2004 |
| Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis M Whitney, SF Corbin, RB Gorbet Acta Materialia 56 (3), 559-570, 2008 | 136 | 2008 |
| System and method for closed-loop control of laser cladding by powder injection E Toyserkani, A Khajepour, SF Corbin US Patent 7,043,330, 2006 | 131* | 2006 |
| Temporal development of melt-pool morphology and clad geometry in laser powder deposition V Fallah, M Alimardani, SF Corbin, A Khajepour Computational materials science 50 (7), 2124-2134, 2011 | 117 | 2011 |
| The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding A Emamian, SF Corbin, A Khajepour Surface and Coatings Technology 206 (1), 124-131, 2011 | 112 | 2011 |
| Impact of localized surface preheating on the microstructure and crack formation in laser direct deposition of Stellite 1 on AISI 4340 steel V Fallah, M Alimardani, SF Corbin, A Khajepour Applied Surface Science 257 (5), 1716-1723, 2010 | 100 | 2010 |
| Influence of matrix strength and damage accumulation on the mechanical response of a particulate metal matrix composite SF Corbin, DS Wilkinson Acta metallurgica et materialia 42 (4), 1329-1335, 1994 | 97 | 1994 |
| Low strain plasticity in a particulate metal matrix composite SF Corbin, DS Wilkinson Acta metallurgica et materialia 42 (4), 1319-1327, 1994 | 89 | 1994 |
| Diffusional solidification phenomena in clad aluminum automotive braze sheet DM Turriff, SF Corbin, M Kozdras Acta Materialia 58 (4), 1332-1341, 2010 | 86 | 2010 |
| The influence of pore and Ni morphology on the electrical conductivity of porous Ni/YSZ composite anodes for use in solid oxide fuel cell applications RMC Clemmer, SF Corbin Solid State Ionics 180 (9-10), 721-730, 2009 | 86 | 2009 |
| Influence of green formulation and pyrolyzable particulates on the porous microstructure and sintering characteristics of tape cast ceramics SF Corbin, J Lee, X Qiao Journal of the American Ceramic Society 84 (1), 41-47, 2001 | 83 | 2001 |
| The influence of iron content on the plane strain fracture behaviour of AA 5754 Al–Mg sheet alloys K Spencer, SF Corbin, DJ Lloyd Materials Science and Engineering: A 325 (1-2), 394-404, 2002 | 79 | 2002 |
Ehsan ToyserkaniMechanical and Mechatronics Engineering, University of Waterloo, CanadaVerified email at uwaterloo.ca
