|Numerical modelling of the material flow during extrusion of aluminium alloys and transverse weld formation|
Y Mahmoodkhani, MA Wells, N Parson, WJ Poole
Journal of Materials Processing Technology 214 (3), 688-700, 2014
|3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity|
Z Zhang, Y Huang, AR Kasinathan, SI Shahabad, U Ali, Y Mahmoodkhani, ...
Optics & Laser Technology 109, 297-312, 2019
|On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing|
R Esmaeilizadeh, U Ali, A Keshavarzkermani, Y Mahmoodkhani, ...
Journal of Manufacturing Processes 37, 11-20, 2019
|Constitutive modeling of Mg–9Li–3Al–2Sr–2Y at elevated temperatures|
G Wei, X Peng, A Hadadzadeh, Y Mahmoodkhani, W Xie, Y Yang, ...
Mechanics of Materials 89, 241-253, 2015
|On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes|
U Ali, Y Mahmoodkhani, SI Shahabad, R Esmaeilizadeh, F Liravi, ...
Materials & Design 155, 495-501, 2018
|Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys|
D Odoh, Y Mahmoodkhani, M Wells
Vacuum 149, 248-255, 2018
|Microstructure evolution and simulation study of a duplex Mg–Li alloy during double change channel angular pressing|
G Wei, Y Mahmoodkhani, X Peng, A Hadadzadeh, T Xu, J Liu, W Xie, ...
Materials & Design 90, 266-275, 2016
|Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed …|
U Ali, R Esmaeilizadeh, F Ahmed, D Sarker, W Muhammad, ...
Materials Science and Engineering: A 756, 98-107, 2019
|Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition|
PD Enrique, E Marzbanrad, Y Mahmoodkhani, Z Jiao, E Toyserkani, ...
Surface and Coatings Technology 362, 141-149, 2019
|Co-extrusion process to produce Al–Mg eutectic clad magnesium products at elevated temperatures|
Y Mahmoodkhani, MA Wells
Journal of Materials Processing Technology 232, 175-183, 2016
|A combined upper bound and finite element model for prediction of velocity and temperature fields during hot rolling process|
S Serajzadeh, Y Mahmoodkhani
International Journal of Mechanical Sciences 50 (9), 1423-1431, 2008
|Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion|
A Keshavarzkermani, R Esmaeilizadeh, U Ali, PD Enrique, ...
Materials Science and Engineering: A 762, 138081, 2019
|An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion|
A Keshavarzkermani, E Marzbanrad, R Esmaeilizadeh, Y Mahmoodkhani, ...
Optics & Laser Technology 116, 83-91, 2019
|On the measurement of effective powder layer thickness in laser powder-bed fusion additive manufacturing of metals|
Y Mahmoodkhani, U Ali, SI Shahabad, AR Kasinathan, R Esmaeilizadeh, ...
Progress in Additive Manufacturing 4 (2), 109-116, 2019
|In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing)|
PD Enrique, Y Mahmoodkhani, E Marzbanrad, E Toyserkani, NY Zhou
Materials Letters 232, 179-182, 2018
|Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed|
R Esmaeilizadeh, A Keshavarzkermani, U Ali, Y Mahmoodkhani, ...
Journal of Alloys and Compounds 812, 152097, 2020
|Modeling the formation of transverse weld during billet-on-billet extrusion|
Y Mahmoodkhani, M Wells, N Parson, C Jowett, W Poole
Materials 7 (5), 3470-3480, 2014
|Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel|
F Ahmed, U Ali, D Sarker, E Marzbanrad, K Choi, Y Mahmoodkhani, ...
Journal of Materials Processing Technology 278, 116522, 2020
|Prediction of roll force in skin pass rolling using numerical and artificial neural network methods|
Y Mahmoodkhani, MA Wells, G Song
Ironmaking & Steelmaking 44 (4), 281-286, 2017
|Mathematical Modelling of the Extrusion of AA3xxx Aluminum Alloys|
Y Mahmoodkhani, MA Wells, N Parson, Y Geng, WJ Poole
Proceedings of the 12th International Conference on Aluminum Alloys, 2010