Amit Arora
TitleCited byYear
Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments
A Arora, R Nandan, AP Reynolds, T DebRoy
Scripta Materialia 60 (1), 13-16, 2009
1712009
Toward optimum friction stir welding tool shoulder diameter
A Arora, A De, T DebRoy
Scripta Materialia 64 (1), 9-12, 2011
1592011
Strains and strain rates during friction stir welding
A Arora, Z Zhang, A De, T DebRoy
Scripta Materialia 61 (9), 863-866, 2009
1402009
Load bearing capacity of tool pin during friction stir welding
A Arora, M Mehta, A De, T DebRoy
The International Journal of Advanced Manufacturing Technology, 1-10, 2012
742012
Back-of-the-envelope calculations in friction stir welding–Velocities, peak temperature, torque, and hardness
A Arora, T DebRoy, H Bhadeshia
Acta Materialia 59 (5), 2020-2028, 2011
742011
Tool geometry for friction stir welding—optimum shoulder diameter
M Mehta, A Arora, A De, T DebRoy
Metallurgical and Materials Transactions A 42 (9), 2716-2722, 2011
702011
Tool durability maps for friction stir welding of an aluminium alloy
T DebRoy, A De, H Bhadeshia, VD Manvatkar, A Arora
Proceedings of the Royal Society A: Mathematical, Physical and Engineering …, 2012
302012
Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding
VD Manvatkar, A Arora, A De, T DebRoy
Science and Technology of Welding and Joining 17 (6), 460-466, 2012
282012
Unusual wavy weld pool boundary from dimensional analysis
A Arora, GG Roy, T DebRoy
Scripta Materialia 60 (2), 68-71, 2009
282009
A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing
S Palanivel, A Arora, KJ Doherty, RS Mishra
Materials Science and Engineering: A 678, 308-314, 2016
172016
Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8% Cr-0.1% Zr alloy
P Sahlot, K Jha, GK Dey, A Arora
Wear 378, 82-89, 2017
142017
An assisted heating tool design for FSW of thermoplastics
PN Banjare, P Sahlot, A Arora
Journal of Materials Processing Technology 239, 83-91, 2017
132017
Cooling rate in 800 to 500 C range from dimensional analysis
A Arora, GG Roy, T DebRoy
Science and Technology of Welding and Joining 15 (5), 423-427, 2010
132010
Wear-Induced Changes in FSW Tool Pin Profile: Effect of Process Parameters
P Sahlot, K Jha, GK Dey, A Arora
Metallurgical and Materials Transactions A 49 (6), 2139–2150, 2018
32018
Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1)
V Tungala, A Arora, B Gwalani, RS Mishra, RE Brennan, KC Cho
Materials Science and Engineering: A 709, 105-114, 2018
32018
Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding
P Sahlot, A Arora
Wear 408, 96-107, 2018
22018
Experimental Characterization of Metal Matrix Composite with Aluminium Matrix and Molybdenum Powders as Reinforcement
A Arora, A Astarita, L Boccarusso, VP Mahesh
Procedia Engineering 167, 245-251, 2016
22016
Traveling Wire Electrochemical Discharge Machining (TW-ECDM) of Quartz Using Zinc Coated Brass Wire: Investigations on Material Removal Rate and Kerf Width Characteristics
AD Oza, A Kumar, V Badheka, A Arora
Silicon, 1-12, 2019
12019
Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding
P Sahlot, SS Nene, M Frank, RS Mishra, A Arora
Science and Technology of Welding and Joining 23 (8), 715-720, 2018
12018
Thermomechanical conditions and stresses on the friction stir welding tool
A Arora
The Pennsylvania State University, 2011
12011
The system can't perform the operation now. Try again later.
Articles 1–20