Michael R. Hill
Michael R. Hill
Professor of Mechanical and Aerospace Engineering, University of California, Davis
Verified email at ucdavis.edu
TitleCited byYear
Residual stress, stress relief, and inhomogeneity in aluminum plate
MB Prime, MR Hill
Scripta Materialia 46 (1), 77-82, 2002
The effects of laser peening and shot peening on fretting fatigue in Ti–6Al–4V coupons
KK Liu, MR Hill
Tribology International 42 (9), 1250-1262, 2009
The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy
H Luong, MR Hill
Materials Science and Engineering: A 527 (3), 699-707, 2010
Uncertainty, model error, and order selection for series-expanded, residual-stress inverse solutions
MB Prime, MR Hill
Assessment of tensile residual stress mitigation in alloy 22 welds due to laser peening
AT DeWald, JE Rankin, MR Hill, MJ Lee, HL Chen
J. Eng. Mater. Technol. 126 (4), 465-473, 2004
The effects of laser peening on high-cycle fatigue in 7085-T7651 aluminum alloy
H Luong, MR Hill
Materials Science and Engineering: A 477 (1-2), 208-216, 2008
The effect of residual stresses on brittle and ductile fracture initiation predicted by micromechanical models
TL Panontin, MR Hill
International Journal of Fracture 82 (4), 317-333, 1996
Through-thickness distributions of residual stresses in two extreme heat-input thick welds: A neutron diffraction, contour method and deep hole drilling study
W Woo, GB An, EJ Kingston, AT DeWald, DJ Smith, MR Hill
Acta Materialia 61 (10), 3564-3574, 2013
Multi-axial contour method for mapping residual stresses in continuously processed bodies
AT DeWald, MR Hill
Experimental Mechanics 46 (4), 473, 2006
The effects of process variations on residual stress in laser peened 7049 T73 aluminum alloy
JE Rankin, MR Hill, LA Hackel
Materials Science and Engineering: A 349 (1-2), 279-291, 2003
Residual stress measurement in a ceramic-metallic graded material
MR Hill, WY Lin
J. Eng. Mater. Technol. 124 (2), 185-191, 2002
Eigenstrain-based model for prediction of laser peening residual stresses in arbitrary three-dimensional bodies Part 1: Model description
AT DeWald, MR Hill
The Journal of Strain Analysis for Engineering Design 44 (1), 1-11, 2009
The inherent strain method for residual stress determination and its application to a long welded joint
MR Hill, DV Nelson
ASME-PUBLICATIONS-PVP 318, 343-352, 1995
Laser Peening Technology.
MR Hill, AT Dewald, AG Demma, L Hackel
Advanced materials & processes 161 (8), 65-67, 2003
Determination of residual stress based on the estimation of eigenstrain
MR Hill
Stanford University, 1996
The slitting method
MR Hill
Practical residual stress measurement methods, 89-108, 2013
Fatigue crack growth performance of peened friction stir welded 2195 aluminum alloy joints at elevated and cryogenic temperatures
O Hatamleh, M Hill, S Forth, D Garcia
Materials Science and Engineering: A 519 (1-2), 61-69, 2009
Three dimensional finite element analysis of a split-sleeve cold expansion process
S Ismonov, SR Daniewicz, JC Newman, MR Hill, MR Urban
Journal of Engineering Materials and Technology 131 (3), 2009
Residual stress and fatigue life in laser shock peened open hole samples
SD Cuellar, MR Hill, AT DeWald, JE Rankin
International Journal of Fatigue 44, 8-13, 2012
Effect of strain gage length when determining residual stress by slitting
MJ Lee, MR Hill
The system can't perform the operation now. Try again later.
Articles 1–20