The influence of wood fiber direction, feed rate, and cutting width on sound intensity during routing P Iskra, C Tanaka European journal of wood and wood products 63 (3), 167-172, 2005 | 60 | 2005 |
Toward a process monitoring of CNC wood router. Sensor selection and surface roughness prediction P Iskra, RE Hernández Wood science and technology 46, 115-128, 2012 | 33 | 2012 |
High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination B Porankiewicz, P Iskra, J Sandak, C Tanaka, K Jóźwiak Wood Science and Technology 40, 673-682, 2006 | 31 | 2006 |
The influence of cutting parameters on the surface quality of routed paper birch and surface roughness prediction modeling P Iskra, RE Hernandez Wood and Fiber Science, 28-37, 2009 | 30 | 2009 |
Toward a process monitoring and control of a CNC wood router: Development of an adaptive control system for routing white birch P Iskra, RE Hernández Wood and Fiber Science, 523-535, 2010 | 22 | 2010 |
Energy balance of the orthogonal cutting process P Iskra, C Tanaka, T Ohtani Holz als Roh und Werkstoff 63 (5), 358-371, 2005 | 22 | 2005 |
Analysis of cutting forces in straight-knife peripheral cutting of wood P Iskra, RE Hernández Wood and Fiber Science, 134-144, 2012 | 21 | 2012 |
A comparison of selected acoustic signal analysis techniques to evaluate wood surface roughness produced during routing P Iskra, C Tanaka Wood science and technology 40, 247-259, 2006 | 19 | 2006 |
High speed steel tool wear after wood milling in presence high temperature tribochemical reactions BK Porankiewicz BioResources 3 (3), 838-858, 2008 | 11 | 2008 |
Development of a new technology for bandsawing using a tip-inserted saw. Part I. Consideration of cutting tool hardness, tool wear, and accuracy of kerf width. C Tanaka, T Ohtani, R Okai, C Hu, Y Iwasaki, P Iskra, J Sandak, L Xuequn Forest products journal 56 (2), 2006 | | 2006 |
REVIEWED ARTICLES-Development of a new technology for bandsawing using a tip-inserted saw. Part 1. Consideration of cutting tool hardness, tool wear, and accuracy of kerf width C Tanaka, R Okai, Y Iwasaki, J Sandak, T Ohtani, C Hu, P Iskra, L Xuequn Forest Products Journal and Index 56 (2), 51-57, 2006 | | 2006 |
Development of an on-line adaptive control of router feed speed using sound intensity IP Ireneusz 島根大学, 2006 | | 2006 |
Energiebilanz beim rechtwinkligen Fräsen P Iskra, C Tanaka, T Ohtani Holz als Roh-und Werkstoff 63, 358-364, 2005 | | 2005 |
Einfluss der Richtung der Holzfasern, des Vorschubs und der Schnittbreite auf die Schallintensität beim Fräsen P Iskra, C Tanaka Holz als Roh-und Werkstoff 63, 167-172, 2005 | | 2005 |