| Development of 3rd generation AHSS with medium Mn content alloying compositions H Aydin, E Essadiqi, IH Jung, S Yue Materials Science and Engineering: A 564, 501-508, 2013 | 289 | 2013 |
| Effect of intercritical annealing parameters on dual phase behavior of commercial low-alloyed steels A Hüseyin, KZ Havva, K Ceylan Journal of Iron and Steel Research International 17 (4), 73-78, 2010 | 75 | 2010 |
| Microstructure evolution of a medium manganese steel during thermomechanical processing B Sun, H Aydin, F Fazeli, S Yue Metallurgical and Materials Transactions A 47, 1782-1791, 2016 | 42 | 2016 |
| Cold sprayability of mixed commercial purity Ti plus Ti6Al4V metal powders H Aydin, M Alomair, W Wong, P Vo, S Yue Journal of Thermal Spray Technology 26, 360-370, 2017 | 39 | 2017 |
| Investigation of dual phase transformation of commercial low alloy steels: Effect of holding time at low inter-critical annealing temperatures HK Zeytin, C Kubilay, H Aydin Materials Letters 62 (17-18), 2651-2653, 2008 | 39 | 2008 |
| The effects of contact conditions on the onset of shear instability in cold-spray F Meng, H Aydin, S Yue, J Song Journal of Thermal Spray Technology 24 (4), 711-719, 2015 | 32 | 2015 |
| Effect of microstructure on exhaust manifold cracks produced from SiMo ductile iron HK Zeytin, C Kubilay, H Aydin, AA Ebrinc, B Aydemir Journal of Iron and Steel Research, International 16 (3), 32-36, 2009 | 30 | 2009 |
| Twinning and Tripping in 10% Mn steels H Aydin, IH Jung, E Essadiqi, S Yue Materials Science and Engineering: A 591, 90-96, 2014 | 29 | 2014 |
| Development of a novel biodegradable metallic stent based on microgalvanic effect J Frattolin, R Barua, H Aydin, S Rajagopalan, L Gottellini, R Leask, S Yue, ... Annals of biomedical engineering 44, 404-418, 2016 | 24 | 2016 |
| Investigating cube-corner indentation hardness and strength relationship under quasi-static and dynamic testing regimes A Ghosh, J Arreguin-Zavala, H Aydin, D Goldbaum, R Chromik, M Brochu Materials Science and Engineering: A 677, 534-539, 2016 | 16 | 2016 |
| Effect of intercritical heat treatment on the microstructure and mechanical properties of medium Mn steels H Aydin, E Essadiqi, IH Jung, S Yue ISIJ international 53 (10), 1871-1880, 2013 | 13 | 2013 |
| Improving Cold Sprayability—Mixed Metal Powders S Yue, W Wong, H Aydin, R Mongrain, R Barua, P Vo, R Dolbec ITSC2015, 473-478, 2015 | 12 | 2015 |
| Effect of microstructure on static and dynamic mechanical properties of third generation advanced high strength steels H Aydin McGill University, 2013 | 10 | 2013 |
| Effects of powder characteristics and mixing powders on cold sprayability and corrosion properties of tantalum coatings X Chu, F Meng, Z Chi, H Aydin, YK Wei, P Vo, W Sun, R Huang, S Yue Surface and Coatings Technology 426, 127763, 2021 | 9 | 2021 |
| Çelik Sacların Çift Faz Isıl İşlemi Sonrası Mekanik ve Mikroyapı Özelliklerinin Değişimi H Aydın Fen Bilimleri Enstitüsü, 2006 | 9 | 2006 |
| Comparing compression deformation and rate sensitivity of additively manufactured and extruded-annealed 316L alloys S Enser, H Yavas, BA Hamat, H Aydın, G Kafadar, AA Tanrıkulu, ... Journal of Materials Engineering and Performance 30, 8831-8840, 2021 | 4 | 2021 |
| Development of a Metallic Biodegradable Stent Based on Microgalvanic Corrosion R Barua, H Aydin, SK Rajagopalan, S Yue, DL Frost, OF Bertrand, ... Journal of Medical Devices 8 (2), 020913, 2014 | 1 | 2014 |
| Degradation Behavior of Nanostructured Stent Materials Using Cold Spray R Barua, R Mongrain, H Aydin, S Yue, OF Bertrand, DL Frost Summer Bioengineering Conference 55607, V01AT20A027, 2013 | 1 | 2013 |
| Effect of heat treatment on the deformation behavior during cold rolling of medium Mn steels H Aydin, E Essadiqi, IH Jung, S Yue Materials Science and Technology Conference and Exhibition 2012, MS and T …, 2012 | 1 | 2012 |
| EFFECT OF MICROALLOYING ELEMENTS AND DEFORMATION MECHANISMS ON THE TWIP STEELS H Aydin, HK Zeytin, H Cimenoglu | 1 | 2009 |
