Martin Abendroth
TitleCited byYear
Identification of ductile damage and fracture parameters from the small punch test using neural networks
M Abendroth, M Kuna
Engineering fracture mechanics 73 (6), 710-725, 2006
1752006
Determination of deformation and failure properties of ductile materials by means of the small punch test and neural networks
M Abendroth, M Kuna
computational materials Science 28 (3-4), 633-644, 2003
1612003
Finite element analyses of three-dimensional crack problems in piezoelectric structures
F Shang, M Kuna, M Abendroth
Engineering Fracture Mechanics 70 (2), 143-160, 2003
712003
Finite element-computation of the electromechanical J-Integral for 2-D and 3-D crack analysis
M Abendroth, U Groh, M Kuna, A Ricoeur
International Journal of Fracture 114 (4), 359-378, 2002
452002
Geometrical modelling of foam structures using implicit functions
J Storm, M Abendroth, M Emmel, T Liedke, U Ballaschk, C Voigt, T Sieber, ...
International Journal of Solids and Structures 50 (3-4), 548-555, 2013
332013
Raman spectroscopic characterization of epitaxially grown GaN on sapphire
C Röder, F Lipski, F Habel, G Leibiger, M Abendroth, C Himcinschi, ...
Journal of Physics D: Applied Physics 46 (28), 285302, 2013
222013
Determination of ductile material properties by means of the small punch test and neural networks
M Abendroth, M Kuna
Advanced Engineering Materials 6 (7), 536-540, 2004
192004
Strength of fine grained carbon-bonded alumina (Al2O3–C) materials obtained by means of the small punch test
S Soltysiak, M Abendroth, M Kuna, Y Klemm, H Biermann
Ceramics International 40 (7), 9555-9561, 2014
172014
G eometry Dependent Effective Elastic Properties of Open‐C ell Foams Based on Kelvin Cell Models
J Storm, M Abendroth, D Zhang, M Kuna
Advanced Engineering Materials 15 (12), 1292-1298, 2013
152013
The influence of the measurement parameters on the crushing strength of reticulated ceramic foams
C Voigt, J Storm, M Abendroth, CG Aneziris, M Kuna, J Hubálková
Journal of Materials Research 28 (17), 2288-2299, 2013
132013
Influence of curved struts, anisotropic pores and strut cavities on the effective elastic properties of open-cell foams
J Storm, M Abendroth, M Kuna
Mechanics of Materials 86, 1-10, 2015
112015
Identifikation elastoplastischer und schädigungsmechanischer Materialparameter aus dem Small Punch Test
M Abendroth
Techn. Univ., 2005
112005
FEM analysis of small punch tests
M Abendroth
Key Engineering Materials 734, 23-36, 2017
102017
Numerical and analytical solutions for anisotropic yield surfaces of the open-cell Kelvin foam
J Storm, M Abendroth, M Kuna
International Journal of Mechanical Sciences 105, 70-82, 2016
102016
Assessment of material properties by means of the small punch test
M Abendroth, S Soltysiak
Recent Trends in Fracture and Damage Mechanics, 127-157, 2016
102016
High-temperature small punch test for mechanical characterization of a nickel-base super alloy
S Soltysiak, M Selent, S Roth, M Abendroth, M Hoffmann, H Biermann, ...
Materials Science and Engineering: A 613, 259-263, 2014
102014
An approach toward numerical investigation of the mechanical behavior of ceramic foams during metal melt filtration processes
M Abendroth, E Werzner, C Settgast, S Ray
Advanced Engineering Materials 19 (9), 1700080, 2017
82017
Influence of foam morphology on effective properties related to metal melt filtration
E Werzner, M Abendroth, C Demuth, C Settgast, D Trimis, H Krause, ...
Advanced engineering materials 19 (9), 1700240, 2017
72017
Multi-axial brittle failure criterion using Weibull stress for open Kelvin cell foams
D Zhang, M Abendroth, M Kuna, J Storm
International Journal of Solids and Structures 75, 1-11, 2015
72015
Identification of creep properties for P91 steels at high temperatures using the small punch test
M Abendroth
Metallurgical Journal 63, 39-43, 2010
72010
The system can't perform the operation now. Try again later.
Articles 1–20