Adil Al Tamimi
Adil Al Tamimi
Verified email at
Cited by
Cited by
Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems
RA Hawileh, HA Rasheed, JA Abdalla, AK Al-Tamimi
Materials & Design 53, 972-982, 2014
Temperature effect on the mechanical properties of carbon, glass and carbon–glass FRP laminates
RA Hawileh, A Abu-Obeidah, JA Abdalla, A Al-Tamimi
Construction and building materials 75, 342-348, 2015
Report 24: workability and rheology of fresh concrete: compendium of tests–report of RILEM Technical Committee TC 145-WSM
PJM Bartos, M Sonebi, AK Tamimi
RILEM publications, 2002
Effects of ratio of CFRP plate length to shear span and end anchorage on flexural behavior of SCC RC beams
AK Al-Tamimi, R Hawileh, J Abdalla, HA Rasheed
Journal of Composites for Construction 15 (6), 908-919, 2011
Prediction of long term chloride diffusion of concrete in harsh environment
AK Tamimi, JA Abdalla, ZI Sakka
Construction and Building Materials 22 (5), 829-836, 2008
Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates
HA Rasheed, J Abdalla, R Hawileh, AK Al-Tamimi
Engineering Structures 147, 473-485, 2017
Performance and cracking behavior of reinforced beams cast with self-consolidating concrete
M Sonebi, AK Tamimi, PJM Bartos
Materials Journal 100 (6), 492-500, 2003
Ambient-cured geopolymer concrete with single alkali activator
GM Zannerni, KP Fattah, AK Al-Tamimi
Sustainable materials and technologies 23, e00131, 2020
Bond behavior of CFRP cured laminates: Experimental and numerical investigation
M Naser, R Hawileh, JA Abdalla, A Al-Tamimi
Journal of engineering materials and technology 134 (2), 2012
High-performance concrete mix for an optimum protection in acidic conditions
AK Tamimi
Materials and Structures 30, 188-191, 1997
Performance of cementitious materials produced by incorporating surface treated multiwall carbon nanotubes and silica fume
A Tamimi, NM Hassan, K Fattah, A Talachi
Construction and Building Materials 114, 934-945, 2016
Assessment of self-compacting concrete immersed in acidic solutions
AK Al-Tamimi, M Sonebi
Journal of Materials in Civil Engineering 15 (4), 354-357, 2003
Fight against COVID-19: The case of antiviral surfaces
K Shirvanimoghaddam, MK Akbari, R Yadav, AK Al-Tamimi, M Naebe
Apl Materials 9 (3), 031112, 2021
Durability of the bond between CFRP plates and concrete exposed to harsh environments
AK Al-Tamimi, RA Hawileh, JA Abdalla, HA Rasheed, R Al-Mahaidi
Journal of Materials in Civil Engineering 27 (9), 04014252, 2015
Effects of harsh environmental exposures on the bond capacity between concrete and GFRP reinforcing bars
A Al-Tamimi, FH Abed, A Al-Rahmani
Advances in concrete construction 2 (1), 1, 2014
Mechanical properties of 3D printed concrete in hot temperatures
AS Alchaar, AK Al-Tamimi
Construction and Building Materials 266, 120991, 2021
Effects of polypropylene fibers on the shear strength of sandy soil
MF Attom, AK Al-Tamimi
International Journal of Geosciences 1 (01), 44, 2010
Evaluation of sustainable concrete produced with desalinated reject brine
KP Fattah, AK Al-Tamimi, W Hamweyah, F Iqbal
International Journal of Sustainable Built Environment 6 (1), 183-190, 2017
Behavior of corroded steel reinforcing bars under monotonic and cyclic loadings
RA Hawileh, JA Abdalla, A Al Tamimi, K Abdelrahman, F Oudah
Mechanics of Advanced Materials and Structures 18 (3), 218-224, 2011
Evaluation of concrete strength made with recycled aggregate
H Al Ajmani, F Suleiman, I Abuzayed, A Tamimi
Buildings 9 (3), 56, 2019
The system can't perform the operation now. Try again later.
Articles 1–20