Andrew Ingram
Andrew Ingram
School of Chemical Engineering, University of Birmingham
Verified email at bham.ac.uk
TitleCited byYear
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC)–A review
A Chandan, M Hattenberger, A El-Kharouf, S Du, A Dhir, V Self, BG Pollet, ...
Journal of Power Sources 231, 264-278, 2013
5222013
Axial and radial dispersion in rolling mode rotating drums
A Ingram, JPK Seville, DJ Parker, X Fan, RG Forster
Powder technology 158 (1-3), 76-91, 2005
882005
Investigation of the effect of impeller rotation rate, powder flow rate, and cohesion on powder flow behavior in a continuous blender using PEPT
PM Portillo, AU Vanarase, A Ingram, JK Seville, MG Ierapetritou, ...
Chemical Engineering Science 65 (21), 5658-5668, 2010
742010
Twin screw granulation—a literature review
TC Seem, NA Rowson, A Ingram, Z Huang, S Yu, M de Matas, I Gabbott, ...
Powder Technology 276, 89-102, 2015
702015
The effect of the amount of binder liquid on the granulation mechanisms and structure of microcrystalline cellulose granules prepared by high shear granulation
AM Bouwman, MJ Henstra, D Westerman, JT Chung, Z Zhang, A Ingram, ...
International journal of pharmaceutics 290 (1-2), 129-136, 2005
542005
Experimental study on the influence of bed material on the scaling of solids circulation patterns in 3D bubbling gas–solid fluidized beds of glass and polyethylene using …
JA Laverman, X Fan, A Ingram, M van Sint Annaland, DJ Parker, ...
Powder Technology 224, 297-305, 2012
522012
Comparison of granule properties produced using twin screw extruder and high shear mixer: a step towards understanding the mechanism of twin screw wet granulation
KT Lee, A Ingram, NA Rowson
Powder technology 238, 91-98, 2013
512013
PEPT and discrete particle simulation study of spout‐fluid bed regimes
JM Link, NG Deen, JAM Kuipers, X Fan, A Ingram, DJ Parker, J Wood, ...
AIChE journal 54 (5), 1189-1202, 2008
512008
Energy and carbon payback times for solid oxide fuel cell based domestic CHP
I Staffell, A Ingram, K Kendall
International Journal of Hydrogen Energy 37 (3), 2509-2523, 2012
502012
Positron imaging techniques for process engineering: recent developments at Birmingham
DJ Parker, TW Leadbeater, X Fan, MN Hausard, A Ingram, Z Yang
Measurement Science and Technology 19 (9), 094004, 2008
472008
Twin screw wet granulation: the study of a continuous twin screw granulator using Positron Emission Particle Tracking (PEPT) technique
KT Lee, A Ingram, NA Rowson
European journal of pharmaceutics and biopharmaceutics 81 (3), 666-673, 2012
462012
Life cycle assessment of an alkaline fuel cell CHP system
I Staffell, A Ingram
International journal of hydrogen energy 35 (6), 2491-2505, 2010
462010
A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions
M Marigo, DL Cairns, M Davies, A Ingram, EH Stitt
Powder technology 217, 540-547, 2012
422012
Probing processes using positrons
JPK Seville, A Ingram, DJ Parker
Chemical Engineering Research and Design 83 (7), 788-793, 2005
382005
Regime map development for continuous twin screw granulation
WD Tu, A Ingram, J Seville
Chemical engineering science 87, 315-326, 2013
342013
Exploring the regime map for high-shear mixer granulation
WD Tu, A Ingram, J Seville, SS Hsiau
Chemical Engineering Journal 145 (3), 505-513, 2009
332009
3D numerical simulation of a lab-scale pressurized dense fluidized bed focussing on the effect of the particle-particle restitution coefficient and particle–wall boundary …
P Fede, O Simonin, A Ingram
Chemical Engineering Science 142, 215-235, 2016
272016
Application of Positron Emission Particle Tracking (PEPT) to validate a Discrete Element Method (DEM) model of granular flow and mixing in the Turbula mixer
M Marigo, M Davies, T Leadbeater, DL Cairns, A Ingram, EH Stitt
International journal of pharmaceutics 446 (1-2), 46-58, 2013
262013
Developing mechanistic understanding of granular behaviour in complex moving geometry using the Discrete Element Method: Part B: Investigation of flow and mixing in the Turbula …
M Marigo, DL Cairns, M Davies, A Ingram, EH Stitt
Powder technology 212 (1), 17-24, 2011
262011
Assessment of different methods of analysis to characterise the mixing of shear-thinning fluids in a Kenics KM static mixer using PLIF
F Alberini, MJH Simmons, A Ingram, EH Stitt
Chemical Engineering Science 112, 152-169, 2014
252014
The system can't perform the operation now. Try again later.
Articles 1–20